
 |
 |
 |
 |
 |
AussieSpeed six cylinder Hemi Performance manifold suit 215 245 265 straight 6. This model suits a 2 barrel 320 350 & 500 CFM Holley carburettor.Has all the features of our 4 barrel manifold except it takes a 2 barrel Carburettor.This manifold can be used with the Aussie Speed water heated plenum box. just the thing to gain performance with your Chrysler,Centura,Charger or Hemi powered race car when limited to a 2V carburattor.
Very similar to Long runner Valiant Cain manifold. |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
This AussieSpeed high performance manifold is Ceramic Coated.
Hemi Performance manifold suit Holley 4 barrel on Australian 245 265 Chrysler 6 cylinder engine.similar in design to the Cain Hemi 4 Barrel manifold with refinements & improvements.
This manifold is coated with a shinny look high temperature ceramic coating. |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
AussieSpeed Hemi Performance manifold is a 4 barrel manifold to suit 245 265 Chrysler,Valiant.The 4 barrel manifold is simular in style to the Cain hemi 4 Barrel manifold that has not been available for years.
John Cain did such a good job that is now been reproduced by Aussiespeed with a few revised design features to produce even more horsepower .These can also be ordered with the pre heat plenum box & for additional torque & horsepower the addition of the Plenum pig in recent dyno testing produced an additional 25+ horsepower |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Hemi 265 6 Pack Charger 7 Fin Sideplate Black.
Chrysler,valiant, hemi six pack painted wrinkle black finish. Also available with matching finish rocker cover & socket head bolt kit. |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Hemi 265 6 Pack Charger Side Plate Polished.
7 fin style polished alloy engine side cover to match the AussieSpeed six pack Bathurst style charger rocker cover. |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
AussieSpeed Hemi 6 Five finned alloy rocker cover Polished.
Aussiespeed polished alloy rocker cover to suit Chrysler valiant. These covers are taller than std tin cover with enough room to clear roller rockers.The covers have cast in breather shrouds so no screws or rivets to fall out & destroy your engine.covers accept pushin style after market breather caps & std type pcv valves. |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Chrysler Hemi 265 4 barrel manifold & plenum pig kit
AussieSpeed 4 barrel Valiant hemi six 4 barrel manifold & plenum pig kit.You will be buying both the plenum pig & long runner 4 barrel manifold. The pig is not fitted but is easy to fit with a few basic tools. Included are bolts for holding in the plenum insert. |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Plenum pig suit AussieSpeed & Cain 4 barrel hemi manifold
The plenum pig designed & made by AussieSpeed will increase torque & horsepower when fitted to a cain or AussieSpeed 4 barrel Chrysler manifold.With a long runner length to help increase mid range & upper RPM. The disadvantage of long runner manifolds can sacrifice low end power & torque. The plenum pig changes this by creating more airspeed at lower RPM.The pig comes supplied with bolts,washers & lock nut. It can be removed at any time by removing the carby & repacing the short bolt supplied with the kit. Due to better atomization in most cases your carburetor may require leaner jets. |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Plenum preheat water box universal weld on
Universal weld on DE ICER box is great for cold areas that can help to warm the inlet manifold by directing warm water from the engine block to help stop fuel from pooling in the manifold until the engine reaches operating temperature. It can be plumbed in with a heater tap so water flow can be turned of when engine reaches operating temp or during summer. The box is 98mm square & a hight of 55mm. The manifold is not included. |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Valiant alloy rocker cover & side plate kit 5 fin polished
Chrysler 245,265 aluminum rocker cover & lifter side cover.The kit contains AussieSpeed tappet cover & matching sideplate in polished aluminum finish & shinnytopz socket head cap screws & washers for both parts & The grommets are also included for the kit.great to finish the engine bay of your charger or centura..Take a look at the repo 6 pack bathurst charger 7 fin alloy rocker cover kit we have available at six plus your 6 cylinder hemi performance specialist |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Hastings Ring Set Chrome Hemi 245
Hastings Ring Set Chrome Hemi 245 +.040 & +.060 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Buy All Your Aussiespeed, Yella Terra, Engine Rebuild Kits, Bolt Kits
and more safely online at Six Plus Performance Warehouse
